What is a 4 Blade Mini Fan?
Stove fans are designed to equally distribute warm air across the room created by a gas or wood burning stove. It has a peltier module that acts as a generator to power the stove fan’s discreet motor.
Our stove fans only use heat from the stove so is completely self-powered. By using a stove fan this will result in lower fuel costs and reduced emissions. The stove fan will begin to operate when the surface temperature reaches 50°C. Due to the low starting temperature our stove fan can be used on gas stoves as well as wood burning stoves. Using a stove fan is the most economical way to effectively circulate warm air. It uses no batteries so can be used where there is no electricity.
There is a safety strip on the base of the fan which is designed to gently lift the base of the fan to prevent it from overheating and damaging the motor. The safety strip will then lower the fan back when the stove decreases to the maximum operating temperature.
Note: Must be placed on top of the stove away from the flue pipe at a minimum distance of 4″+Features
- 2200 RPM Max (Average 1732 RPM)
- Height 125mm, Width 110mm
- Optimum burn (300°C) ft/min (CFM) 350
- Increases the efficiency of your stove by up to 33%
- Circulates warm air over large areas
- Fully heat powered
- 50°C low starting temperature
- Fan speed automatically varies with temperature
- Very quiet operation
- Constructed with anodised aluminium
Reviews
There are no reviews yet.